EDIMAX IC 1000 DRIVERS FOR WINDOWS MAC

Enter the new password you want to use for the camera.

Retype the new password to confirm the setting. You have to wait for a while for the firmware upgrade.

If you want to reset the camera, click this button. The edimax ic 1000 settings of the camera are as follows. Discuss: Edimax IC - network surveillance camera Sign in to comment Be respectful, keep it civil and stay on topic.

This camera support web connection, the default web port is Since the web server may use port 80, you can use a different. It means the camera is disconnected or edimax ic 1000 in the Internet.

It means the camera is connected. It displays all information of the selected camera.

Are you a human?

Page Detail Setting 6. The default value is as follows. Post a edimax ic 1000. Introduction 3. Package Content 3. System Requirement 3. Installing the camera for the first time: z You computer must edimax ic 1000 equipped with network card and RJ network connector. One end is connected to the network jack of computer; the other end is connected to the network jack located at the rear side of the IP-CAM. When you want to change IP address, please write down the original IP address on your computer first. Step 1. Figure 3 z Fill static IP Address as shown below.

Connect to Edimax IP cameras

An example of static IP Address modification. Installation is very easy, including reassigning static IP.

Edimax ic 1000 Setup is a little awkward. Some features of the software are not in agreement with the manual--cannot flash firmware yet, rotate image only by deg, not 90deg as described.

Edimax IC-1000 Manuals

Design by concrete5studio. Setting Wizard Using The Camera Viewer edimax ic 1000 Panel Introduction Version, Note, Date, File Type, File Size. v, upgrade_engEDIMAX_64_WG_IC_PTN_V2_,ZIP, MB. v, ICPTn. I. Product Information.

Edimax IC-1000 - network surveillance camera Specs

I Package Contents. ICW. QIG. CD-ROM. Power Adapter Ethernet Cable.

Mounting Kit. I Back Panel. MAC/Cloud ID. LAN Port.